Bengaluru, Karnataka
GST No. 29AACFL4843L1ZX
Call 08048965674 94% Response Rate
01 |
LOAD CELLS. |
9 |
DATA ACQUISITION SYSTEM. |
02 |
PRESSURE TRANSDUCER. |
10 |
AMPLIFIERS. |
03 |
TORQUE TRANSDUCER. |
11 |
SPMS. |
04 |
LVDT. |
12 |
STRAIN MEASUREMENTS AT SITE. |
05 |
CUSTOMIZED LOAD CELL. |
13 |
STRAIN INDICATOR. |
06 |
CRANE LOAD CELL. |
14 |
MULTI CHANNEL STRAIN INDICATORS. |
07 |
TENSIO METER. |
15 |
AIRCRAFT WEIGHING SYSTEM. |
08 |
WIRE TENSIOMETER. |
26 |
AUTOMATIC CG COMPUTATION. |
Product Brochure
Transducer Type | Displacement Transducer / LVDT |
Material | Stainless steel |
Type | Displacement Transducer / LVDT |
Usage | Position Sensor |
Theory | Linear Variable Differiatial Transformer |
Output | Analog SENSOR |
DISPLACEMENT TRANSDUCERS from
“LOAD MASTER”.
Features:
v Rugged applications.
v Long Term High Stability.
v Both for dynamic as well as static applications
v Ideally suit for industrial applications.
v Strain gauge based displacement Transducer
Specifications:
1 | Type | SGDT 100 |
2 | Range | ± 2mm to 50mm |
3 | Input Resistance | 350±5 Ohms |
4 | Output Resistance | 350±2 Ohms |
5 | Creep ( % of RO) | ±0.05% for 30 Minute |
6 | Non Linearity | ± 0.2% of full scale |
7 | Non Repeatability | ± 0.1% of Full Scale. |
8 | Initial offset | ± 1% of FS |
9 | Sensitivity | 2 mV/V |
10 | Rated Output Tolerance | ± 0.5 % of FS |
11 | Maximum Supply voltage | 12V |
12 | Recommended supply voltage | 10V |
13 | Temperature effect on Zero ( %/°C of FS) | 0.008 |
14 | Temperature effect on Span ( %/°C of FS) | 0.003 |
15 | Safe Over Load permitted | 150 % of RL. |
|
View Complete details
Product Brochure
Sensor Type | Defined |
Brand | Load Master |
Type | Accelerometer |
Usage | Speed Sensor |
Material | Stainless Steel |
Theory | Resistance Sensor |
Values measured : Peak Or RMS Value
• Units : mm/sec or in/sec (*1Factory Set)
• Range : 0 to 50 mm/sec Peak (Factory Preset)
II Displacement
• Values measured : Peak to Peak
• Units : microns or mils (*1Factory Set)
• Range : 0 to 500 microns (Factory Preset)
I Accelerometer : 100mv/g (+/- 10%)
II Velocity Sensor : 4 mv/mm/sec (+/- 10%)
I Frequency Ranges : Factory preset (±3dB)
• 2 to 1000 Hz
• 2 to 5000 Hz
• 2 to 10000 Hz
• 2 to 20000 Hz
• 10 to 1000 Hz
• 10 to 10000 Hz
II Display
• Output display : "5 seven-segment displaysa. Right most 3 digits for numerical valueb. All 5 digits
to indicate message strings”
• Measured parameters : Velocity / Displacement (*1Factory Set)
• Indicators : 1 Bi colour LED Pk/RMS/Pk-Pk,
Ch1 - Safe/Alert/Danger, Ch2 - Safe/Alert/Danger
1 Bi colour LED - Velocity/Displacement,
in/sec/mils, mm/sec/micron (*1Factory Set)
III Key Pad : "Keypad with integrated LEDsa. 4 tactile keysb. LEDs fori. Channel selected for
displayii. Velocity or Displacementiii. Units: mm/s or in/siv. Units: µm or milv.
Channel status"
IV Output : 4-20 mA = ch1 and ch2 individual
• Through rear panel terminals : Buffered output of sensor output Ch1 and Ch2 on rear terminal blocks
• Relay Output : Relay contact - 2 No.s For Alert and Danger
Relay contact details - 5A, 240VAC / 220VDC
Sensor failure - On Display
• Communication port (Optional) "a. MODBUS over RS485 b. Modes: RTU and ASCII (*1Factory Set)"
V Monitor accuracy : ±2% of FSD
(Measurement Range
VI Operating voltage : 230V/115V ±10% @ 50Hz, Factory Selectable
VII Operating conditions
• Temperature range : 0 to 70ºC upto 95% humidity (non condensing)
I Panel mounted : Size: 144(H) x 72(W) x 180(D) mm
• Front fascia/Bezel : 144 (H) X 72 (W) mm
• Cutout : 138 (H) X 68 (W) mm
II Field mounted:
• Enclosure size : 330 (H) x 165 (W) x 95 (D)
• Construction : Aluminium Die-cast with IP65 Keypad
• Protection : IP65
• Cable Entry : 7 nos PG9 suitable for 4 to 8 mm OD cable
View Complete details